SC NOR Adapter Chip Reader For Spreadtrum 6533G SoC For INFINITY CM2 UFED XRY

SC NOR Adapter for Spreadtrum 6533G SoC is a programmer in the form of a USB key that allows access to data contained in the internal NOR memory embedded in SC6533G.

These processors (SoC) are most often found in budget phones, the so-called Features phones like as well as many smartwatches.

Due to the lack of an SPI or I2C access protocol, the only possibility of accessing the data after a device failure (e.g. breaking the motherboard to prevent access) was to perform a chip SWAP to a functional device.

Our adapter revolutionizes data recovery from such cases - just after ChipOFF, place the processor in the adapter and connect the adapter to the USB to enable data reading.

Features:

- physical reading of NOR memory directly from ALL processors based on SC 6533G (e.g. damaged devices) regardless of the manufacturer

- communication in DLOAD mode by just pressing button

- reading deleted Messages, Lists of calls made, Contacts using appropriate investigative software

NOTE: To perform the reading, appropriate software is required that allows communication with the SPD loader

Technical specification:

- made from solid monolith block of TecaFORM-H made in Germany and brushed aluminum for durability.

- printed circuit made with the highest precision of 4mils and gold plated pads to minimize interference.

- specially developed PCB tracks routing technology to prevent interference during SoC with PC communication.

- special high quality pogo contact pins used which are used for specialized laboratory tests.

Supported device models:

- all devices based on the SC6533G processor (regardless of the manufacturer's brand, software versions), i.e. SmartWatch phones and watches

Procedure:

1) Make a SoC ChipOff from a damaged motherboard
2) Clean system from tin and flux residues (remove BGA balls)
3) Place the BGA chip in the adapter
4) Run the content reading or programming software (Infinity Box CM2SCR) and select the appropriate service option or reading mode
5) Press and hold "DLOAD" button
6) Connect the USB key to the computer
7) Wait for comunication, relese "DLOAD" button

Warranty

We offer 12 months of warranty for this product