Motherboard Tester For iPhone 6s Plus 6 Plus 6s 6 5s Mijing AMTC Cable Repair

MIJING AMTC Motherboard Test Cable Repair Tool for iPhone 6s Plus/6 Plus/6s/6/5s

• Supports battery fast charging
• Supports battery activation (for dead dormant battery)
• Supports DATA mode, connect motherboard to PC / MAC for motherboard maintenance, current detection, firmware updates via itunes / 3utools etc.
• With 6 corresponding repairing wires for specific phone

Operations:

Motherboard brush:

• Install the battery on the test line PCB board, push down the switch (switch to DATA mode type), connect the test line to the USB port of the computer, the hardware detected after the DATA board carried out the transfer of the corresponding firmware.

Fast battery charging:

• The battery is mounted to the PCB board, switch board and push down (switch to charging mode, power supply to 4.2V), power supply interface of the tested line is connected to the battery to charge quickly.

Motherboard maintenance current detection:

• When current detection is needed for motherboard maintenance, connect the test line PCB plate to the motherboard, push down the switch (switch to charging mode, power supply to 4.2V), can be observed for a long time without appearing restart effect, and the temperature will not be too high.

Compatible with:

• For iPhone 6s Plus
• For iPhone 6
• For iPhone 6 Plus
• For iPhone 6s
• For iPhone 5s
• For iPhone 5

Package included:

• 1 x iPhone 5G Repairing Wire
• 1 x iPhone 5s Repairing Wire
• 1 x iPhone 6 Repairing Wire
• 1 x iPhone 6 Plus Repairing Wire
• 1 x iPhone 6s Repairing Wire
• 1 x iPhone 6s Plus Repairing Wire
• 1 x Transfer Line

Functions:

Support for connecting the Motherboard Flash and Writing
1. Connect test cable to motherboard
2. Install battery in motherboard
3. Connector computer with USB port
4. Switch to flash mode Type 
5. Running tunes to flash

Support battery fast charging and activation
1. Switch cable button to charge mode
2. Install battery in test cable
3. USB port connector to adapter Test Cable
4. Adjust the power meter output voltage to 4.1V
5. Connect power meter to activation or charge

Maintenance motherboard detection current
1. Switch cable button to voltage test mode
2. USB port connector to adapter 
3. Test cable connect motherboard
4. Adjust the power meter output voltage to 4.1V
5. Adapter connect power meter to test motherboard

Package include:
1x 4 Port USB Power Connector
6x USB Cable